The ArmorClad Master Kits are packaged to do a standard 2 car garage which normally runs 450-500 sq ft.
The ArmorClad Master Kits are packaged to do a standard 2 car garage which normally runs 450-500 sq ft. The 600 sq ft of coverage allows for a safety factor, as if your floor is a bit more porous, or you apply it a bit thicker than the standard application, then coverage can fall. We sell the kits in Master Kit size and an ‘Add On Kit’ size which contains half the amount of the Master Kit, does up to 300 square feet, and is ideal for popular 3-car garages. We recommend a safety factor of 10-15% minimum so you don’t run out during the application. If your project is ‘in between’, and you are unsure as to how much material you need, but don’t want to run short during the project, you can order additional Master or Add on Kits, and return any unopened kits for full credit with no restocking charges, only paying return shipping. If your needs are unusual, or you need coverage advice, please call or email. ArmorClad can also make up custom kits to match your desired project.
Please note that 100% solids epoxies are not paints, and conditions such as humidity and temperature can affect final color result somewhat, even with coatings from the exact same batch. For this reason, please make sure you have enough product on hand, as stopping in the middle of the job, and ordering more at a later time may result in color shifts which are not a covered warranty item.