Steps on how to prep your floor for re application of a product
Step 1. We suggest using a 3M red pad on a floor buffer to scratch the floor up. If you would like a more aggressive prep then sanding with a 150 grit pad is advisable.
Step 2. Ensure to vacuum and sweep thoroughly after sanding has been completed
Step 3. Wipe down the floor with denatured alcohol and a microfiber mop.
Step 4. Let the floor dry for 30 minutes
Step 5. Reapplication of the product can begin!
Please note that Armorpoxy sells hundreds of different products for both indoor and outdoor use. These are general preparation steps for re application of a coating including, epoxies, urethanes, polyaspartics, and polyureas. However specific products may require a different preparation process. Please consult your sales rep for specific information around your product.