We explain the key differneces between counter attack, counter attack + , and single component and when to use both products.
Counter Attack (CA), Counter Attack + (CA+) and Single Component (SC) are one part silicone hybrid ceramic sealers. They were created after the orignal line of BallstiX was introduced as an easy and convenient way for DIYers and contractors to get the benefits of the original BallistiX line but without the mixing!
Counter Attack (CA)
COUNTERATTACK was designed to produce every benefit that all of the BallistiX sealers could offer. COUNTERATTACKs primary intended use of offering a food-safe, bacterial-inhibiting, high-heat and virtually scratch-proof environment grew and progressed into a large-scale opportunity that allowed a spray-only application that did not repel or reject on present surfactants much like other highly-sensitive reactive silanes. Great for use on focal and vertical applications. This technology has been designed specifically for hard-surface install. Do not let the name sway or limit you. COUNTERATTACK will withstand even the harshest of foot traffic and can be installed with ease.
The counter attack (CA) is a build coat (1 mil) and can be applied to both coutertops as well as flooring applications. CA has an increased slip coefficient and chemical resistance, whereas the CA+ is harder to scratch and much easier to apply. CA can be applied as spray only, dip and wipe, or spray and mop. (with Waterwiz applicator).
Single Component (SC)
Sharing the same intent as BallistiX SQUIRE, SC boasts an improved abrasion and chemical resistance. While UV-stable, this product is not UV-impervious. A 9H on the MOHS Hardness Scale, this 1 mil. coating offers max-level protection with an extremely easy approach. Simply pop the top and apply, either by sprayer only, spray and mop, or dip and roll using a foam roller. This product is extremely hydrophobic and slip-resistant when installed in environments where bare feet may come in contact with the coating, our proprietary GRENADE – SLIP PACK is recommended, virtually invisible and can be easily included during the dip and roll process, broadcast independently or mixed in the solution and sprayed with the coating. This product is high-gloss in appearance but has the option of mixing our proprietary GRENADE – SATIN/MATTE PACK which gives an extremely beautiful satin/matte sheen without impacting performance.
Single Component is a higher solids version of CA. This means SC should be used on cementitious surfsces (poruours and irregular surfaces) and CA should be used on all smooth and slick surfaces. You just can’t apply SC too thick, or it can crack and break and scratch easier.
Counter Attack + (CA+)
This enhanced version of our wildly popular COUNTERATTACK coating is virtually fool proof with an ease of installation that even a DIYer can feel confident completing. Simply apply by rubbing product into the surface/substrate and hand-buff to completion. This product is virtually invisible and is extremely versatile, reacting to very few impregnating sealers, giving installers the ability to offer additional protection without removal of current products.
The key differneced between CA and CA+ is that CA+ is a rub on, buff of product that CANNOT be screwed up, it’s semi-penetrating – which means, no film, no build and extremely durable. You HAVE to hand buff it at 2 mins, or it gets extremely hard on the surface and must be mechanically buffed. CA+ is for ANYTHING you can hand apply it to. It's very hard to screw up applying this product. It is most commonly used on focal application such as countertops and similar type small applications. IT SHOULD NOT BE USED ON FLOORS.